Aquapel treated windows provide safer driving in rain. snow and sleet.
- Remarkably improves vision in the rain!
- Forces rain to bead and roll off windshield
- Repels rain, snow, and sleet
- Makes ice, snow, bugs, and dirt easier to remove
- Provides durable, long lasting performance
- Promotes safe driving
How It Works
Aquapel® Glass Treatment forms a chemical bond with the glass, which increases water repellency, causing water to bead and easily shed off the glass. Aquapel applies in just minutes to a clean, dry windshield or any exterior glass surface. Aquapel lasts up to 6 times longer than silicone-based products, remaining highly effective after months of normal use, including heavy rain and snow, car washing, glass cleaning and salt spray.
How To Use It
Step 1) Thoroughly clean and dry the glass
Step 2) Apply Aquapel by holding the applicator between the thumb and fingers with the pad down and level over the windshield. Squeeze the wings together until a popping sound is heard and liquid is released onto the pad. Use immediately. Wipe the soft pad of the applicator over the glass up and down then side-to-side to ensure the glass is well covered. Avoid painted surfaces. Remove liquid from non-glass surfaces with dry paper towel.
Step 3) Remove the excess Aquapel on the windshield, and dry the glass with clean dry paper towels immediately after Aquapel has been applied to the entire windshield. Dispose of applicator and paper towel. Failure to wipe immediately may cause hazing that requires additional buffing with a clean dry paper towel.
Notes: One single-use applicator will treat one windshield or two side windows. Do not let Aquapel air dry onto windshield. Wipe off immediately. When applying to large surface areas treat and dry one half at a time. Application conditions: Do not apply in temperatures colder than 50º F or hotter than 90º F or in excessively humid conditions. Cleaning glass with ordinary glass cleaners will not affect product durability.
Recommended Application Intervals
For maximum benefits, Aquapel® should be reapplied every 6 months or as needed.
Aquapel® is a registered trademark of PPG Industries.
